Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in San Antonio?
Gate repair in San Antonio typically costs between $240 and $680 for most common fixes, with the average homeowner spending around $410. Simple repairs like hinge lubrication and sensor realignment run $95 to $185, while full gate motor replacement lands between $850 and $2,400 depending on the brand and horsepower. Our written price before work starts means you’ll know your exact number before any wrench turns.
Those prices reflect what we see daily across San Antonio neighborhoods, from Alamo Heights to Stone Oak to Helotes. Gate repair is one of those services where the quote range matters less than the written price you receive before a technician touches your equipment. At Warden Gate Repair, that written price is non-negotiable policy for our Gate Repair services, not a sales tactic.
Key Takeaways
- Most San Antonio gate repairs fall between $240 and $680
- Gate motor replacement is the biggest single expense, at $850 to $2,400 installed
- Service call fees in San Antonio typically run $75 to $125, often waived with repair
- Same-day service is available from Warden Gate Repair, with live phone coverage 24/7
- Every repair includes a written price upfront and the 365-Day Done Right Promise
Gate Repair Cost Breakdown (2026)
Here’s what you can expect to pay for common gate repairs in the San Antonio market this year. These are real ranges based on what we quote and complete across the city and surrounding areas like Converse, Schertz, and Leon Valley.
| Repair Type | Typical Cost Range | What’s Included |
|---|---|---|
| Service call / diagnostic visit | $75 – $125 | On-site inspection, written quote; often credited toward repair |
| Gate alignment and hinge repair | $180 – $340 | Re-hanging, shimming, hinge replacement if needed |
| Gate track or roller replacement | $220 – $450 | Parts and labor; depends on gate weight and track length |
| Gate sensor (photo eye) realignment or replacement | $95 – $210 | Sensor unit plus alignment and testing |
| Gate opener circuit board repair or replacement | $300 – $700 | Board, wiring check, programming |
| Gate motor (operator) replacement | $850 – $2,400 | Motor unit, mounting, programming, safety testing |
| Keypad or remote programming | $85 – $160 | Programming and syncing existing remotes or keypads |
| Full gate replacement (swing or slide) | $1,800 – $5,500 | Gate fabrication or purchase, hardware, installation |
What pushes a repair toward the higher end of these ranges? Equipment brand matters. A LiftMaster or FAAC operator runs more than a generic unit because the parts are factory-specific and the programming is brand-locked. Gate weight and size matter too. A 16-foot iron swing gate in Terrell Hills weighs considerably more than a 10-foot aluminum gate in a newer subdivision near Cibolo, and heavier gates stress hinges, motors, and tracks faster-our Hinge & Post Repair team sees this often.
Access also plays a role. Gates set back from the street or built into stone pillars add labor time. And San Antonio’s climate has a say: our summer heat cycles bake circuit boards and strain motors, while spring storms knock sensors out of alignment. We see more sensor and board failures from June through September than any other stretch of the year.
What Affects Gate Repair Pricing in San Antonio
- Gate motor brand and type. A Mighty Mule opener is more affordable than a commercial-grade FAAC or BFT. We service all nine major brands we’re factory-trained on, so brand rarely limits repair options, but it does set parts pricing.
- Gate weight and size. Iron gates, especially ornamental ones in older neighborhoods like Monte Vista, are heavy. Weight drives hinge wear, motor strain, and labor hours.
- Repair vs. replacement. A control board swap at $300 to $700 often beats a full motor replacement. But a 12-year-old operator with a burned board and a seized gearbox is usually better off replaced, and that’s the $850 to $2,400 line item.
- Access and site conditions. Gates on sloped driveways, gates built into stone columns, or gates where the operator is buried in a tight enclosure all add time. Time is labor, and labor is a line item.
- Parts availability. Common parts like photo eyes and remotes are usually on the truck. Specialty boards for a Viking or DoorKing unit may need same-day or next-day sourcing from a local San Antonio supplier.
- Urgency and timing. Nights and weekends are part of our normal coverage, and live phone support runs 24/7, but emergency after-hours dispatch can carry a modest premium over standard daytime rates.
How Much Does a Gate Motor Replacement Cost in San Antonio?
A gate motor, called an operator in the trade (that’s the box that slides or swings your gate automatically), costs between $850 and $2,400 to replace in San Antonio when you include the unit, mounting hardware, programming, and safety testing. Entry-level residential operators like a Mighty Mule or base-model Linear sit at the lower end. A mid-range LiftMaster swing operator runs $1,200 to $1,800 installed. Commercial duty FAAC, BFT, or DoorKing units can push past $2,000, especially on a heavy iron gate.
If the motor is humming but not moving, you may only need a capacitor or a gear replacement, which lands in the $200 to $500 range. If the board is unresponsive and the motor is older than ten years, we’ll usually recommend replacement over repair and explain why with real numbers. That decision is always yours, and the written price comes before the work.
How Much Does a Gate Sensor Repair Cost in San Antonio?
Gate sensor repair in San Antonio runs $95 to $210 depending on whether the photo eye needs realignment or full replacement. Alignment-only fixes are the cheapest, often done in under an hour. A full sensor replacement, with the new unit tested against the operator’s safety loop, lands closer to $200.
San Antonio’s spring and summer storms, especially the wind gusts that roll through in April and May, are a common culprit when sensors shift. A misaligned sensor will stop the gate mid-cycle or refuse to close. The safety loop is there to keep a closing gate from striking a person, a pet, or a parked car. We treat sensor work as safety work, and we test it thoroughly before we leave.
Is It Cheaper to Repair or Replace My Gate System?
Repair is usually cheaper in the moment. A $400 board replacement beats a $1,400 operator replacement. But the honest math includes age. If a gate system is 12 to 15 years old and you’re facing repair quotes above 50% of replacement cost, replacement starts making practical sense.
Here’s the frame we use with San Antonio homeowners: ask what the repair buys you in time. A board replacement on a 5-year-old LiftMaster is a repair that should deliver years. A board replacement on a 14-year-old operator with a tired gearbox is a bridge, not a solution. We’ll tell you which one you’re looking at, in writing, before any money changes hands.
Our Gate Repair Process: What to Expect
Every Warden Gate Repair visit follows the same sequence. You’ll know who is coming, when they’ll arrive, and what the repair will cost before work begins.
1. You Call and Talk to a Person
Our phones are answered live, 24/7, 365 days a year. No voicemail tree, no chatbot. You’ll describe the symptom, schedule the visit, and get a confirmation right then.
2. You Receive Your Technician’s Name and Photo
Before your appointment, we send the name and photo of the technician coming to your home. That’s the Threshold Standard, and it’s enforced on every single visit. When the doorbell rings, you can match the face to the photo before you open the door.
3. The Technician Diagnoses and Writes the Price
Your technician inspects the gate, identifies the fault, and writes the repair price before any work begins. If you approve it, the work starts. If you don’t, you pay only the diagnostic fee and the decision is entirely yours.
4. The Repair Is Completed and Tested
The technician completes the repair and runs the gate through full open, close, and safety-loop testing. You’ll see it cycle before we consider the job done.
5. Your 365-Day Done Right Promise Begins
Every repair carries our 365-Day Done Right Promise in writing. If the repair fails within a year, we return and make it right at no cost. A free second visit is built into the price of the first one.
How to Save on Gate Repair in San Antonio
- Don’t ignore a noisy hinge or a slow-cycling motor. Small problems become big ones when gates stay in service through heat and rain. A $200 hinge repair now beats a $2,000 operator replacement later.
- Keep the track clean. For slide gates, a quick sweep of the track every month or two removes the grit that grinds rollers and strains motors. It costs nothing and extends component life measurably.
- Address sensor issues early. A gate that reverses or refuses to close is often a simple sensor fix. Waiting turns a $95 realignment into a safety issue and sometimes a burned board.
- Get a written estimate before approving work. This is the simplest savings lever in home service. A written price removes surprise and lets you compare options on the actual number, not a vague range. Call (940) 531-3336 for a free estimate from Warden Gate Repair San Antonio.
- Ask about the diagnostic fee credit. If you approve the repair, many companies, including ours, credit the diagnostic fee toward the repair total. It’s worth asking on the phone before the visit.
Gate Repair Brands We Service in San Antonio
We repair and maintain gate operators across the brands most common in San Antonio homes and small properties. Factory-trained service means we carry the right parts and the right programming knowledge for each one, which keeps labor time down and repair accuracy up.
- LiftMaster – the most common residential brand in San Antonio, with parts widely stocked on our trucks
- FAAC – hydraulic and electromechanical operators, common on taller and heavier gates
- BFT – imported Italian engineering, often found on custom home gates in Alamo Heights and Olmos Park
- Linear – workhorse operators from the Apollo line, popular in newer subdivisions
- Viking – residential swing and slide operators, straightforward and durable
- Ghost Controls – the DIY-leaning brand we often inherit when a homeowner installs one and needs a professional to finish or fix it
- DoorKing – commercial-grade units, sometimes found on larger San Antonio properties and small communities
- Elite – slide gate systems, common on ranchettes outside the loop
- Mighty Mule – the budget-friendly option, with parts available and serviceable
A warden is trusted to watch over a place and keep it secure. That’s the whole idea behind a gate. When the opener that runs that gate fails, the repair matters more than a simple fix; it restores the boundary between your home and everything outside it.
Who Is Cole Rafferty?
Warden Gate Repair San Antonio is led by Cole Rafferty, who brings more than a decade of gate and access-control experience to the role. The company has been part of the Threshold Group family since 2008, and that heritage shows up in the details: the photo-badged technician at your door, the written price in your hand, and the guarantee behind every repair. Cole’s team doesn’t do general handyman work or unrelated home services. Gates are the whole job.
FAQs – Gate Repair Cost
How much is a gate service call fee in San Antonio?
If you’re searching Gate Repair Near Me in San Antonio, TX, expect gate service call fees to typically run $75 to $125. Most repair companies, including Warden Gate Repair, credit that fee toward the repair if you approve the work on the spot. Call (940) 531-3336 to ask about waiving or crediting the diagnostic fee on your specific repair.
Can you repair my gate the same day I call?
In most cases yes. San Antonio is our home market, and common repairs like sensor alignment, hinge fixes, Lock Repair, and remote programming are often completed same-day. Live phone coverage runs 24/7, so call (940) 531-3336 and we’ll tell you over the phone whether we can get a technician to you today.
Is gate repair covered by home warranty or homeowners insurance?
Some San Antonio home warranty policies cover gate operators, and some do not. Insurance rarely covers wear-and-tear repairs but may cover storm damage. We recommend checking your policy language, and we’re glad to provide a written diagnosis and quote that you can submit for reimbursement. Call (940) 531-3336 to schedule a documented inspection.
How long does a gate motor last in San Antonio?
Residential gate motors in San Antonio typically last 8 to 12 years depending on gate weight, duty cycle, and heat exposure. Units that run dozens of cycles per day in south-facing sun tend to fail earlier. If your operator is nearing year 10 and acting up, a written repair quote versus replacement quote will help you decide with real numbers.
What does the 365-Day Done Right Promise cover?
Every gate repair from Warden Gate Repair carries a written 365-Day Done Right Promise. If the repair fails within one year, we return and fix it at no charge. The return visit is included in the original price, period. It’s how we guarantee the work, and it’s in writing on every job.
Do you charge extra for evenings or weekends in San Antonio?
Night and weekend dispatch can carry a modest premium over standard daytime rates, but live phone support is always free and always staffed. Call (940) 531-3336 any hour, describe what your gate is doing, and we’ll give you an honest answer about cost and timing before a truck is even dispatched.
Get Your Free Gate Repair Estimate in San Antonio
Gate repair pricing in San Antonio doesn’t have to be a guess. Call Warden Gate Repair at (940) 531-3336 and you’ll get a live person, a scheduled visit with a named and photo-verified technician, and a written price before any work begins. Every repair carries the 365-Day Done Right Promise in writing. If it’s not right, we return free. That’s the whole deal.
If you’re researching costs before you call, start with our home page for a full look at how we do business. The quick summary: we answer the phone, we tell you who’s coming, we put the price in writing, and we stand behind the work for a full year.
Pricing reflects the San Antonio market as of 2026. Warden Gate Repair San Antonio offers free estimates – call (940) 531-3336.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving San Antonio and surrounding communities in the gate repair trade.
What Our Customers Say
"Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Remotes were out of range. He replaced the antenna and re-paired the remotes. Works from the street now."
- Valerie T.