Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in San Antonio, TX
Hinge and post repair fixes the two structural points that carry the entire weight of your gate: the hinges that let it swing and the post that holds it in place. In San Antonio, where clay soil shifts with every wet-dry cycle and summer heat bakes steel posts into the ground, these components fail more often than people expect. Warden Gate Repair San Antonio handles hinge and post work as a core specialty, not an afterthought. If your gate drags, leans, or won’t close squarely, call (940) 531-3336 and we’ll tell you exactly what’s wrong and what it costs to fix before any work starts.
This work falls under our broader Gate Repair in San Antonio service, but hinge and post repair deserves its own focus because when these two points go, everything attached to them – the gate motor, the lock, the sensors, the gate itself – gets pulled out of alignment right along with them. Fixing the hinge and post first is often what saves you from replacing everything else later.
Here’s what you should know up front: hinge and post repair in San Antonio typically costs between $275 and $1,400 depending on whether we’re replacing a pair of hinges, re-setting and bracing a leaning post, or digging out and pouring a new post foundation entirely. Most hinge-only repairs run $275 – $650. Post replacement with new concrete runs $700 – $1,400. We give you a written price before we touch anything, and that price doesn’t change.
Every repair comes with our 365-Day Done Right Promise. If the hinge or post repair doesn’t hold, the return visit is free. We put that in writing because in San Antonio’s soil, a post set too shallow won’t announce its failure until the next big rain. We’d rather guarantee the work properly than ask you to trust us on faith.
When You Need Hinge & Post Repair
San Antonio gates fail at the hinge and post in predictable ways. Here’s what we see most often when we’re called out across the city:
- The gate drags or scrapes against the ground. This usually means the hinge side has sagged or the post has started leaning inward. You’ll see fresh scrape marks in the driveway or a worn arc in the grass where the gate’s path used to be clear.
- The gate leans visibly to one side. A gate should sit square within its frame when closed. If it tilts, especially at the top corner opposite the hinge, the post itself has likely shifted in the soil. San Antonio’s expansive clay does this constantly – it swells when wet, shrinks when dry, and slowly walks the post out of plumb.
- The gate won’t close or latch properly. When hinges wear or the post drifts, the latch bolt no longer lines up with the catch. You might find yourself lifting or shoving the gate to get it to close, which is exactly the kind of strain that eventually bends the frame.
- You hear the gate motor straining or grinding. Operators on brands like Viking, DoorKing, and Ghost Controls are built to push a certain amount of weight smoothly. When a hinge binds or a post shifts, the motor works harder, runs hotter, and shortens its own lifespan. If you hear a change in the motor’s pitch, the problem is often mechanical at the hinge, not electrical in the motor.
- The post is cracked at the base or rusting through near the ground line. Steel posts in San Antonio hold up well, but the bottom six inches sit in the most corrosive environment on the property: wet soil, splashback from rain, and trapped moisture. Once rust pits the metal at that point, the post loses strength exactly where the load is highest.
- The gate swings open or shut on its own. If the gate drifts when you let go of it, the post is out of level or the hinges are worn unevenly. That drift will confuse the operator’s limit settings and can damage the arm or sliding mechanism.
If any of this sounds familiar, you’re not looking at a gate that needs a tune-up. You’re looking at a structural failure at the gate’s two most loaded points. Addressing it early saves money, and it keeps everyone who walks through your gate safer.
Our Hinge & Post Repair Process
We don’t send someone out to improvise. Every hinge and post repair follows the same sequence, whether it’s a small sagging gate or a full post re-set:
- Talk to a live person. Call (940) 531-3336 any time – someone answers 24/7, not a voicemail, not a chatbot. We’ll ask what you’re seeing, get your address, and schedule a visit.
- Meet your technician before they arrive. We send you the name and photo of the technician coming to your home before the appointment. At the door, they show a photo ID badge that matches what we sent. This is the Threshold Standard – background-checked, identity-verified, photo-badged – and it’s non-negotiable on every visit. A warden is trusted to watch over a place and keep it secure, and that’s the whole idea we built this company around.
- Diagnostic and written price. We check the hinges, the post plumb, the weld points, and the post base using a level and a close look at the concrete. Then we hand you a written price. No ranges that expand later, no “while we’re here” additions. If the repair is $425, the paper says $425.
- The repair itself. For hinges: we remove the old ones, assess the frame holes, replace or upgrade the hinge set, and re-align the gate to hang square. For posts: we dig out the old footing, set the post in fresh concrete at the correct depth for San Antonio’s soil, brace it level, and let it cure properly before re-hanging the gate. We also re-align the motor, chain, or arm to match the corrected geometry.
- Post-repair test and walkthrough. We cycle the gate, check the latch, and confirm the operator (if it’s helping move the gate) works without strain. We walk you through what we changed before we leave.
- 365-Day Done Right Promise in writing. Every hinge and post repair is guaranteed. If it fails within 365 days, the return visit is free. You have our word in writing.
Most hinge repairs are finished in a single visit. Post replacements, because the concrete needs to cure, typically require a day to set the post and a day to re-hang the gate. We’ll tell you which one applies before we schedule anything.
Hinge & Post Repair Pricing in San Antonio
Here are honest San Antonio price ranges for hinge and post work, based on what we bill across the area. These are not bait numbers. They’re what you can expect on the written estimate:
- Hinge replacement (pair, standard weight gate): $275 – $450. Includes new hardware, labor, and re-alignment of the gate.
- Hinge replacement (heavy steel or custom gate): $450 – $650. Larger weld-on or specialized hinges, plus re-balancing.
- Hinge repair with frame reinforcement: $350 – $550. When the weld points or bolt holes have wallowed out and need steel plate reinforcement.
- Single post re-set (brace and re-concrete): $700 – $1,000. Dig, set, concrete, and re-align the gate to the corrected post.
- Full post replacement (dig out old, new steel post, new concrete): $900 – $1,400. New post set at the proper depth for San Antonio soil.
- Hinge and post repair combined: $950 – $1,600. When both points fail together, which is common when a leaning post has been left too long.
What changes the price? Three factors drive most of it. First is gate weight: a light ornamental gate costs less to lift and re-align than a 400-pound steel driveway gate. Second is post condition: if the post is still sound and just needs re-setting, that’s cheaper than digging out a rusted-through post and setting new steel. Third is what’s attached: gates with operators (the motorized box that provides automatic gate repair capability) from brands like Elite or Ghost Controls require extra care to re-align the drive mechanism after the structural work. That reflects in labor, not in hidden fees.
We give the written price before any work begins, and the estimate is free. Call (940) 531-3336, describe what you’re seeing, and we’ll tell you whether a quick hinge replacement or a full post re-set likely applies – and what the visit will cost.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in San Antonio?
Hinge-only repair in San Antonio runs $275 – $650, while post re-setting or replacement runs $700 – $1,400, and combined hinge-and-post work falls between $950 and $1,600. The exact price depends on gate weight, post condition, and whether the gate operates on a motorized operator. We give you a written, no-surprise price before any work begins, and estimates are free – call (940) 531-3336 for an exact quote.
Is it cheaper to repair a sagging gate hinge or replace the whole gate?
Repair is almost always cheaper, and it’s usually the right call if the gate leaf itself is still sound. A pair of new hinges and re-alignment costs a fraction of a new steel gate, especially on San Antonio’s ornamental and driveway gates. We only recommend replacement when the frame needs weld and rust repair or is warped beyond repair – and even then, we’ll show you the damage before you decide. Call (940) 531-3336 and we’ll walk through what you’re seeing.
Can you fix a leaning gate post without replacing it?
Yes, if the post itself is still structurally sound. We dig around the existing footing, re-level the post, and pour fresh concrete to lock it in place. If the post is rusted through at the base or cracked, re-setting won’t hold – it needs replacement. Either way, we’ll show you what we found before we recommend anything. Call (940) 531-3336 to schedule an inspection.
Can you come today for a hinge or post repair?
In most cases, yes. We keep San Antonio hinge and post calls on a same-day or next-day schedule, and our phone is answered by a live person 24/7. If you’re standing in front of a gate that won’t close because the post is leaning, call (940) 531-3336 right now and we’ll get a photo-badged technician to your home as soon as we can.
Do you repair hinges and posts on gates with automatic openers?
Yes. We service the structural side and the lock repair and operator side together, which matters because a hinge or post repair changes the gate’s swing path and the operator has to be re-aligned to match. We work on operators from DoorKing, Viking, Elite, and Ghost Controls, among others, and our technicians are factory-trained on those brands. That means the right parts and the right knowledge arrive together. Call (940) 531-3336 for a free estimate.
Why San Antonio Homeowners Choose Warden Gate Repair
We’re not a general contractor who happens to fix a gate now and then. We’re a gate-specific repair company, founded in 2008 as part of the Threshold Group family, and hinge and post work is what we do every week in this city. We are an independently owned and operated location, which means the person who owns this business is responsible for the work we leave at your gate.
That owner, Cole Rafferty, built this San Antonio operation around the two things homeowners quietly worry about when they call a repair company: who’s actually coming to the door, and what it’s actually going to cost. Both of those questions get answered before your technician ever rings the bell. That’s the Threshold Standard at work, and it’s not a marketing slogan – it’s the operating rule on every single visit.
If your gate is sagging, leaning, scraping, or refusing to close, don’t let it keep wearing on the hinges, the post, and the motor. Call (940) 531-3336. A real person answers, we send you a name and a photo before arrival, and the price is on paper before any work starts.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving San Antonio.