Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Kirby, TX
We’re Warden Gate Repair, a gate and opener specialist serving Kirby, TX. Most gate work in Kirby comes down to two things: older hardware on homes built between the 1950s and 1980s, and the corrosion that hard water and Gulf humidity leave behind. That’s why we keep corrosion-resistant parts on the truck and send our techs with a written price before any work starts. If you need gate repair in Kirby, call (940) 531-3336 and you’ll reach a live person, not a voicemail.
Why Kirby Homes Are Different
Kirby sits just east of San Antonio, but it has its own repair profile. The older neighborhoods were built when chain-link and simple ornamental iron gates were the default, and many of those gates are still in service sixty or seventy years later. What that means in practical terms: sagging gates, worn hinge pins, and posts that have shifted in the clay soil. Kirby’s clay expands when wet and contracts when dry, and over enough seasons it pushes gate posts out of plumb. We see that constantly on gates that were never set in deep concrete footings.
The other major factor is corrosion. Kirby’s water is hard, and when irrigated lawn water hits a gate post or hinge every morning, the minerals build up and eat at the metal. Combined with the humid summers and the occasional severe thunderstorm that rolls through, electrical components on automated gates fail faster here than in drier parts of Texas. For Kirby homeowners, that means gate motor repair often involves replacing the housing or rewiring connections, not just swapping a battery. We plan for that.
Styles & brands we work with
Our Main Kirby Services
Most Kirby homeowners call us for one of three things. Here is what each involves locally.
Gate Repair in Kirby
A sagging gate in Kirby is usually not just an old hinge, it’s a post and soil problem. Wrought iron and chain-link gates from the 1960s and 1970s often have posts set in shallow footings that have been pushed out of level by the clay. We repair the gate, yes, but we also reset the post when that’s what’s causing the drop. Learn more about what’s involved on our Gate Repair in Kirby page, including pricing for post resets and hinge replacement.
Electric Gate Repair in Kirby
Kirby’s hard water is rough on electric gate components. Outdoor keypads, control boxes, and safety sensors take the same mineral build-up and humidity that rust the metal, and that’s before the thunderstorms add a power surge to the mix. We carry the parts for most major openers and can usually diagnose the problem in one visit. Visit our Electric Gate Repair in Kirby page for a full breakdown of what we test and what those repairs cost.
Gate Motor Repair in Kirby
The motor, the box that slides or swings your gate automatically, works hard in Kirby. Heat waves in August push the motor’s thermal protection, and older motors that weren’t sized for a heavy iron gate tend to fail after enough summers. We repair and replace motors from the major brands and give a written price before we touch anything. Details are on the Gate Motor Repair in Kirby page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
We service Linear, Viking, and Ghost Controls openers, among others, and we stock the common parts for these brands locally so most Kirby repairs don’t wait on a shipped component. See our brands for the full list. Factory-trained means the right part and the right knowledge arrive together.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Kirby, TX
| Service | Typical range in Kirby |
|---|---|
| Gate repair – hinge or latch replacement | $150 – $325 |
| Gate repair – sagging gate correction | $225 – $475 |
| Gate repair – post reset or reinforcement | $300 – $650 |
| Electric gate repair – control board replacement | $275 – $550 |
| Electric gate repair – keypad or safety sensor replacement | $180 – $400 |
| Gate motor repair – capacitor or limit switch | $160 – $320 |
| Gate motor repair – full motor replacement | $500 – $1,300 |
| Service call and diagnosis | $75 – $125 |
Prices in Kirby run higher when a post has shifted in the clay or when corrosion has worked its way into the electrical housing, because both add labor and parts. Whatever the job, you get a written price before any work starts, and that price doesn’t change at the end. No surprise line items.
Neighborhoods We Serve in Kirby
We cover all of Kirby, from the older homes off Ackerman Road to the newer subdivisions on the east side of town. Most Kirby residents can get a visit within one to two business days, and emergency calls are scheduled as they come in.
- Kirby city center and Ackerman Road area
- West Kirby near the San Antonio line
- East Kirby subdivisions
- The older residential blocks north of Gibbs Sprawl Road
- Communities along Farm to Market Road 78
Service Area – Cities Near Kirby
Beyond Kirby, our crews serve the surrounding San Antonio metro. If you’re in San Antonio, TX, Schertz, TX, Fair Oaks Ranch, TX, or Terrell Hills, TX, we can help with gate repair there as well. Dispatch and scheduling are coordinated from our San Antonio office, but the technicians you’ll meet are local to the Kirby area.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kirby
Most non-emergency visits in Kirby are scheduled within one to two business days. Emergency gate failures, like a gate stuck open at night or a motor that won’t respond, are prioritized and typically seen the same day. Call (940) 531-3336 and a live person answers around the clock.
Repairs and like-for-like replacements rarely require a permit in Kirby. What you should check before changing the gate’s height, style, or material is your HOA, if you have one. We can install to most association standards, and we handle the work itself, not the paperwork.
Yes. Every Warden technician is background-checked, identity-verified, and photo-badged, and we send their name and photo to you before they arrive. That’s the Threshold Standard, and it’s enforced on every Kirby visit. If the repair isn’t right, the 365-Day Done Right Promise covers a free return visit.
Call Warden Gate Repair in Kirby at (940) 531-3336 for a free estimate. You’ll speak with a real person, get a written price, and know exactly who’s coming to your gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A.