Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Terrell Hills, TX
Gate repair in Terrell Hills, TX usually costs between $180 and $340 for spring or hinge work, and $250 to $600 for motor and control board repairs. The difference here is the housing stock: most jobs involve original ornamental wrought-iron gates from the 1920s to 1950s, not lightweight modern aluminum. We quote a written price before any work starts. Call Warden Gate Repair at (940) 531-3336 for a free estimate.
Why Terrell Hills Homes Are Different
Terrell Hills is one of the few San Antonio-area pockets where a gate call usually starts with a welding assessment, not a parts swap. The stately 1920s-1950s estate homes along streets like Garraty Road, Eldon Road, and Wiltshire Avenue frequently have original hand-forged drive gates. Those gates were built heavy on purpose. When a hinge sags or a post shifts, the fix often means cutting, fabricating, and re-welding steel in place, which is why we carry welding and fabrication skills as a core part of every gate repair visit here, not as an add-on.
The climate works against these old gates too. Hot, humid summers push gate motors to overheat, and afternoon thunderstorms drive rust into hinges and latch housings. Underneath, the clay soil expands and contracts with every wet-dry cycle, slowly shoving gate posts out of alignment. A gate that scrapes the drive in August was probably fine in April. Terrell Hills homeowners also tend to want repairs done quietly: gates sit back from the street on long drives, and nobody wants a grinding motor echoing down a tree-lined block at 6 AM. We account for all of that when we inspect.
Styles & brands we work with
Our Main Terrell Hills Services
Most Terrell Hills calls fall into three categories: mechanical gate failures, electrical and automation problems, and gate motor (the box that slides or swings your gate automatically) trouble. Each has its own dedicated Terrell Hills page below.
Gate Repair in Terrell Hills
Gate repair in Terrell Hills often means saving an original wrought-iron gate rather than replacing it. We handle sagging hinges, bent or rusted frames, broken latch hardware, and post alignment on heavy swing gates common to 1920s-1950s estate properties. Welding and on-site fabrication are part of the job here more than in any neighboring city. The clay soil shifts posts, the humidity eats steel, and the weight of these old gates punishes worn hardware. See the full breakdown on Gate Repair in Terrell Hills.
Electric Gate Repair in Terrell Hills
Electric gate repair in Terrell Hills covers the automation side: keypads, safety edges, photo eyes, loop detectors, and the low-voltage wiring that runs from the house to the gate. Storms and clay soil movement often disconnect or pinch underground wire runs on deep lots. We test the full circuit before replacing any component, because a dead keypad is sometimes just a break in a 15-year-old wire. Details are on Electric Gate Repair in Terrell Hills.
Gate Motor Repair in Terrell Hills
Gate motor repair in Terrell Hills deals with the box that slides or swings your gate automatically: the motor itself, the control board, the capacitor, and the gear assembly. Summer heat pushes these units hard, especially ones mounted in direct afternoon sun. We service Viking, Ghost Controls, and DoorKing motors among others, and carry the common control boards and capacitors for those brands in our Terrell Hills stock. Read more at Gate Motor Repair in Terrell Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Terrell Hills
We service Viking, Ghost Controls, DoorKing, and Elite equipment, among others. We keep common boards, capacitors, and gear kits for these brands stocked so a typical Terrell Hills motor repair doesn’t wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Terrell Hills, TX
| Service | Typical range in Terrell Hills |
|---|---|
| Gate spring replacement | $180 – $340 |
| Hinge replacement or re-weld | $200 – $400 |
| Gate post realignment | $200 – $375 |
| Wrought-iron frame repair (weld/fabricate) | $250 – $500 |
| Gate motor replacement (standard swing) | $450 – $900 |
| Gate motor repair (board/capacitor) | $250 – $600 |
| Control board replacement | $300 – $650 |
| Keypad or safety edge replacement | $150 – $350 |
| Underground wire repair | $200 – $450 |
| Full gate replacement (wrought-iron, single swing) | $1,800 – $4,500 |
Prices in Terrell Hills run higher than in newer subdivisions because the work is heavier: hand-forged steel takes more labor to weld and realign than thin aluminum. You’ll get a written price before any work starts, always. No surprise line items at the end. Call (940) 531-3336 for an exact quote, free of charge.
Neighborhoods We Serve in Terrell Hills
We cover all of Terrell Hills, including the estate streets around Garraty Road and the residential blocks north and east toward the Wilshire Terrace edge. Most Terrell Hills calls get a same-day or next-day response.
- Garraty Road corridor
- Eldon Road estates
- Wiltshire Avenue area
- Northeast Terrell Hills (near Burr Road)
Service Area – Cities Near Terrell Hills
Warden Gate Repair also serves the surrounding San Antonio metro. If you’re in a neighboring community, you can find us at San Antonio, TX, Schertz, TX, Kirby, TX, or Fair Oaks Ranch, TX. Dispatch is coordinated from our San Antonio office; crews serve Terrell Hills locally.
Serving Terrell Hills, TX - Our Local Coverage Area
We’re based in the Terrell Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Terrell Hills
Most Terrell Hills gate repair calls get a same-day or next-day response. Emergency jobs, like a gate stuck open or a motor that won’t shut off, are prioritized. Call (940) 531-3336 and we’ll give you a straight answer on timing before you hang up.
Terrell Hills has its own city permitting rules, and some gate changes do require city approval. We’ll tell you during the free estimate if your specific repair or replacement needs one, and we can advise on the process. No guesswork on your end. Call (940) 531-3336 to discuss your gate.
Yes. We cover all of Terrell Hills, including the Garraty Road corridor, Eldon Road, Wiltshire Avenue, and the streets near the northern and eastern edges. If you’re in Terrell Hills, you’re in our service area.
For a written price before any work starts, call Warden Gate Repair at (940) 531-3336. We’ll send a technician by name and photo before arrival, and every repair is covered by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Terrell Hills Customers Say
"Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R."Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A.