Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Windcrest, TX
Gate repair in Windcrest usually involves a sagging ornamental iron gate on a 1960s ranch home, an opener that predates modern safety sensors, and a city inspector who will notice both. We work on original driveway gates that have spent 50 or 60 years in San Antonio heat and humidity, and we know what Windcrest code enforcement expects before we turn a single bolt. If your gate is sticking, dragging, or refusing to close, call (940) 531-3336 and tell us what you’re seeing – we’ll give you a straight answer and a written price before any work starts.
Why Windcrest Homes Are Different
Windcrest was built out mostly between the late 1950s and the 1970s, and that means two things for gate work. First, many homes still have their original driveway gates – ornamental iron and chain-link units that were installed when the house went up. Those gates have now endured half a century of hot, humid summers that accelerate rust on hinges and posts, plus intense UV exposure that turns plastic rollers and rubber stops brittle. Second, the houses themselves are ranch-style and two-story brick veneer on generous lots, which often means wider driveway openings and heavier gates than you’ll find in newer subdivisions.
The city’s own permitting process adds another layer. Windcrest inspectors are known for enforcing setback and height limits closely, and many pre-2000 automatic openers lack the safety sensors current code requires. A simple “my gate won’t open” call can turn into a conversation about bringing the whole system up to present-day standards. We handle that conversation regularly, and we’ll walk you through exactly what’s required before we order any parts.
Styles & brands we work with
Our Main Windcrest Services
Here are the three services Windcrest homeowners call us about most often, each with its own dedicated page covering local conditions, pricing, and what to expect.
Gate Repair in Windcrest
Most Windcrest gate repairs start with a hinge or latch problem: sagging panels where the gate catches on the driveway, rusted hinge pins, or a latch that no longer aligns. On the original ornamental iron gates common here, decades of heat and humidity do real damage to welded joints and mounting posts. We straighten, re-weld, replace hardware, and repaint as needed, and we’ll tell you honestly when a gate is too far gone and replacement makes more sense than another patch. Full details are on our Gate Repair in Windcrest page.
Electric Gate Repair in Windcrest
Automatic gate systems in Windcrest fail in predictable ways: the safety sensors stop seeing obstacles, the keypad or remote loses its pairing, or the wiring inside the control box corrodes from humidity. What complicates local jobs is age. Many Windcrest openers were installed before 2000, and they may not meet modern safety requirements. We diagnose the fault, explain the fix, and when code upgrades are needed, we quote them clearly. See Electric Gate Repair in Windcrest for the full breakdown.
Gate Motor Repair in Windcrest
The gate motor – the box that slides or swings your gate automatically – takes the brunt of Windcrest weather. The capacitor, the limit switches, and the gearbox all wear faster in our climate, and hail can get inside the housing through damaged seals. We rebuild most motors the same day when parts are in the van, and we stock for the brands Windcrest homes run most. Before replacing an entire motor, we show you exactly what failed and why. The detailed guide is here: Gate Motor Repair in Windcrest.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Windcrest
We service and repair DoorKing, Linear, Viking, and Ghost Controls systems, among others. Our vans carry common parts for all of them, so most Windcrest jobs wrap up in one visit. You can review the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Windcrest, TX
| Service | Typical range in Windcrest |
|---|---|
| Hinge replacement or re-weld (single gate) | $180 – $340 |
| Latch or lock repair | $120 – $240 |
| Rusted post remediation | $220 – $450 |
| Chain-link gate re-tensioning | $140 – $260 |
| Safety sensor replacement | $160 – $300 |
| Keypad or remote reprogramming | $90 – $180 |
| Control board diagnosis and repair | $200 – $420 |
| Gate motor rebuild (gears, capacitor, limit switches) | $280 – $520 |
| Full opener replacement (motor and arm) | $750 – $1,500 |
What pushes a Windcrest quote toward the top of those ranges is usually code compliance: if the existing opener lacks modern safety sensors, that work gets added to the written estimate before we begin. The number we quote is the number you pay. You approve every line item before any work starts, and there are no surprise additions at the end.
Neighborhoods We Serve in Windcrest
We cover the full city, from the original ranch homes near Midcrown Drive to the larger custom lots and executive properties scattered through Windcrest’s northern and eastern sections. Response time across the city is typically same-day for repair calls made before early afternoon.
- Midcrown
- Walzem Road corridor
- North Windcrest
- Eisenhauer Road area
- Windcrest Country Club vicinity
Service Area – Cities Near Windcrest
If you’re just outside Windcrest, we also serve San Antonio, TX, Schertz, TX, Kirby, TX, and Fair Oaks Ranch, TX. Each city has its own set of gate challenges, and the same written-price, named-technician standards apply everywhere we go.
Serving Windcrest, TX - Our Local Coverage Area
We’re based in the Windcrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Windcrest
Most repair calls are same-day if you reach us before early afternoon. We dispatch from our San Antonio office, and crews are scheduled throughout Windcrest daily. Once you’re on the schedule, you’ll get the technician’s name and photo before the visit. Call (940) 531-3336 and we’ll tell you exactly who’s coming and when.
Structural changes and electrical work often do require city approval, and Windcrest code enforcement is strict about setback and height limits. We’ll tell you during the estimate whether your job needs a permit, handle the paperwork when required, and make sure the work passes inspection. No surprises.
Everything – parts, labor, the new hardware, and the service call. You see the full written quote and sign off before we start. If the repair fails within 365 days, the return visit is free under our 365-Day Done Right Promise. That’s the deal on every Windcrest job, no exceptions.
If your gate is sagging, stuck, or making a sound it shouldn’t, call (940) 531-3336. We’ll send a background-checked, photo-badged technician you’ll know by name before they arrive, with a written price in hand. And if the repair isn’t right, we come back and make it right – free. That’s how Warden Gate Repair works in Windcrest.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Windcrest Customers Say
"The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.