Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Schertz
A stuck or dead electric gate in Schertz usually comes down to one of three things: a failed gate motor, a wiring or conduit problem from the original build, or a hinge post that has shifted on our expansive clay soil. Most repairs in Schertz run between $180 and $650 depending on the component, and our Gate Repair in Schertz gets a technician to your property with a written price before any work starts. Call (940) 531-3336 any hour, day or night, and you’ll speak to a live person who can dispatch to Schertz.
We know this city’s gates because we work on them every week. From the original town center’s wrought-iron swing gates to the smart-enabled slide gates in the master-planned communities off Borgfeld Road and Roy Richard Drive, the failure patterns are specific to this soil and this climate. A gate that works fine in Stone Oak can fail differently six miles east in Schertz, and our repair approach accounts for that.
Why Warden Gate Repair San Antonio Is Schertz’s Preferred Electric Gate Repair Company
Schertz homeowners choose us because we remove the two things that make gate repair stressful: not knowing who is coming to your property and not knowing what the repair will cost. Every technician we send to Schertz is background-checked, identity-verified, and photo-badged under the Threshold Standard. Before your appointment, you receive the technician’s name and photo. When they arrive, their ID badge matches. That’s the rule on every single visit, no exceptions.
We also give you a written price before any work begins. Not a ballpark, not a range you’ll “narrow down later” – a fixed number you approve first. That’s been our practice since 2008, when Warden Gate Repair was founded as part of the Threshold Group family. The 365-Day Done Right Promise backs every repair: if it isn’t right, we return and make it right, free of charge. That written guarantee is included with every job.
Our dispatch and scheduling are coordinated from our San Antonio office, and crews serve Schertz locally. That means the technician who arrives at your gate knows the difference between a Gate Opener Repair on a 1970s ranch-style home on FM 1518 and a newer build near the Schertz Parkway corridor. The soil shifts differently, the conduit runs are different, and the operator brands vary by builder. Local familiarity shortens diagnostic time and gets your gate working faster.
Styles & brands we work with
Gate Opener Repair in Schertz
Gate Opener Repair in Schertz is the work of diagnosing and fixing the motor, control board, or drive mechanism that powers your automatic gate. In this city, we see a lot of builder-grade operators on newer-construction slide gates that were installed to a minimum spec, not to the demands of daily use. A typical gate opener repair in Schertz runs $220 to $520, with full motor replacements ranging $650 to $1,400 depending on brand and gate weight. Our lead, Cole Rafferty, has seen nearly every failure mode the Schertz clay can produce, and he trains every tech to the same standard.
Builder-Grade Operators on New Construction
Many of the newer subdivisions in Schertz were built with a functional-but-basic operator doing the job at closing. Two or three years in, that operator is failing. We commonly find conduit stubs with no pull strings, loop detector wiring left exposed in buried junction boxes, and safety photocells that were never aligned correctly in the first place. We pull new conductor, set proper rack and pinion clearance, and reprogram entry keypads so the gate cycles correctly instead of faulting every afternoon in the sun.
Hardwired vs. Solar Operators
Schertz gets plenty of sun, and we do install solar-capable openers, but we always evaluate the actual gate duty cycle and the shade pattern on your property before recommending one. A hardwired operator with a proper power run is more reliable for daily-use driveway gates, especially with the humidity we get along Cibolo Creek. If the power run is short or the panel is far from the gate, solar can work, but we’ll be straight with you about the tradeoffs and give you a written price either way.
Automatic Gate Repair in Schertz
Automatic Gate Repair in Schertz means restoring a gate that opens and closes on its own – whether that’s a slide gate, a swing gate, or a retrofit automation added to an older manual gate. Schertz has a lot of both: old wrought-iron swing gates in the original town center and modern slide gates in the new subdivisions. Pricing for automatic gate repair in Schertz ranges from $180 for a sensor or keypad fix to $1,100 or more for a full operator replacement with new controls. You’ll get an exact number in writing before we touch a component.
Retrofitting Manual Gates with Automation
Many ranch-style homes in Schertz still have manual gates, and homeowners often ask us to add automation. The gate itself may be in decent shape, but the hinge post is another story. On this clay, a post without a deep enough concrete footing will shift within a year of an opener being attached. We inspect the post, and if the footing is inadequate we address the sag correction and reinforcement before mounting the operator. Skipping that step is how you end up with a gate that binds and a motor that burns out.
Control Board and Safety Sensor Issues
Summer heat along the Cibolo Creek corridor does real damage to control boards mounted inside dark metal enclosures. Boards overheat, thermal protection trips, and gates fault in the afternoon. We relocate or ventilate enclosures, replace failed boards, and set safety photocells and edge sensors correctly. The work is exacting, and the payoff is a gate that opens when you pull in and doesn’t creep shut on a kid or a car.
Trusted Brands We Service in Schertz
Our technicians are factory-trained on the brands most common in Schertz driveways, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep parts for these brands stocked locally so a Schertz repair doesn’t wait on a two-week backorder. If a builder put a Ghost Controls opener on your new home and it’s reversing, we know the wiring tricks and programming quirks on that platform. If you have an older Viking slide operator, we know its failure points in this humidity. If it’s a DoorKing or an Elite, same story. The right part and the right knowledge arrive together, and both are supplied by a technician you know by name and photo before the appointment.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Schertz Homes
- Clay-soil hinge post shift in older sections. The soil around the original town center expands and contracts with moisture, pushing gate posts out of plumb. A sagging gate binds against the opener, stalls the motor, and burns through limits. We reset or reinforce posts, then retune the opener travel.
- Builder-grade conduit and wiring shortcuts in new subdivisions. New master-planned communities off Borgfeld Road and Schertz Parkway often have loop detector wiring run through unsealed conduit boxes that fill with dirt and moisture. The gate faults intermittently and the builder’s warranty team can’t find it. We can, and we repair the run properly.
- Overheated control boards from summer heat. Dark metal operator enclosures with no ventilation can push control board temps past their rated limit in a Schertz July. Boards fault or fail outright. We mount boards in ventilated enclosures and often add a small active vent to keep air moving.
- Misaligned or weather-damaged safety photocells. Photocells get dirty, knocked out of alignment, or water-damaged and the gate reverses or refuses to close. It’s often a five-minute fix, but the cause is usually specific to how the cell was mounted, so we correct the mounting, not just the alignment.
Pricing for Electric Gate Repair in Schertz, TX
You should know the number before you call, so here it is straight. A gate opener or control board repair in Schertz typically runs $220 to $520. Safety sensor or keypad repairs run $150 to $280. A full operator replacement with new controls runs $650 to $1,400 depending on brand, gate weight, and whether we need to run new conduit and power. A retrofit automation job, including post inspection and any footing work, typically runs $1,200 to $2,800. Every quote is written, agreed before work starts, and backed by the 365-Day Done Right Promise. Call (940) 531-3336 for a free estimate on your specific gate.
We Also Serve Cities Near Schertz
Our crews serve Schertz and the surrounding communities, including Universal City, San Antonio, and Floresville. If your property sits on the Schertz side of a boundary line, or you’ve got a gate at a second property nearby, we’ll send the same named, photo-badged technician and the same written-price guarantee. Learn more about our Electric Gate Repair service area or see the full Electric Gate Repair in Schertz coverage.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Schertz
Heavy rain saturates the clay soil and shifts the gate’s hinge post or track slightly, enough to bind the gate and trip the operator’s fault logic. The fix is usually post or track correction, not a new board, and in Schertz we address the post footing so the same rain doesn’t do it again. Call (940) 531-3336 for an exact quote – estimates are free.
Yes, and in the older sections of Schertz this is one of our most common retrofits. The deciding factor is the post: if the concrete footing isn’t deep enough for the opener’s torque, we reinforce it first, then mount the operator. The gate gets a new life with automation, and the operator doesn’t burn out in a year. Electric Gate Repair starts with a quote in writing, before any work begins.
In Schertz’s newer subdivisions, Ghost Controls repair in Schertz often starts with openers reversing because the safety photocells were misaligned from day one or the loop detector wiring was left exposed in a buried box, so moisture and dirt create false obstructions. We fix the wiring and alignment, not just the symptom. Call (940) 531-3336 and we’ll send a named, photo-badged tech to diagnose it.
For daily-use driveway gates in Schertz, a hardwired unit is the more reliable choice, especially with the humidity and the duty cycle most gates see. Solar can work if the power run is impractical, but we’ll show you the tradeoffs in writing before you choose. Estimates are free at (940) 531-3336.
Annual service is the right schedule for Schertz’s climate, with a focus on hinge posts, operator torque, and control board ventilation before summer heat arrives. We’ll inspect the post footings, clean and align sensors, and tune the motor travel, and you get a written list of anything that’s wearing before it fails. Call (940) 531-3336 to schedule service or a free estimate.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving Schertz since 2008.