Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in San Antonio, TX
Gate lock repair in San Antonio typically costs between $95 and $280, depending on whether you need a keyed lock replaced, a solenoid re-aligned, or a full electronic lock retrofit on an automatic gate. Most lock repairs we handle are completed in a single visit, and we give you a written price before any work begins. If you’re standing at a gate that won’t latch or a keypad that won’t accept your code, call Warden Gate Repair San Antonio at (940) 531-3336 and we’ll walk you through what we’re seeing.
A gate lock is different from a door lock in one important way: it works outdoors, in San Antonio’s heat, dust, and occasional flash-rain conditions. That exposure shortens the life of internal springs, cylinders, and solenoid coils. We specialize exclusively in gate hardware, so when we repair a lock, we’re also checking the strike plate alignment, the gate’s sag, and the opener’s behavior. It’s all connected. For a full picture of what we cover across the gate system, see Gate Repair or read more about Gate Repair in San Antonio.
Key Takeaways
- Lock repair in San Antonio averages $95 to $280, with a written quote before work starts
- We service locks on gates with openers from Viking, Ghost Controls, DoorKing, and Elite, among others
- Every technician is background-checked, photo-badged, and sent to you by name and photo before arrival
- The 365-Day Done Right Promise means a free return visit if the repair doesn’t hold
- Same-day service is available for most lock failures, and our phones are answered by a live person 24/7
When You Need Lock Repair
Not every gate problem is a lock problem. But when it is, the signs are usually specific. Here’s what San Antonio homeowners call us about most often:
- The key turns but the gate won’t open. This usually means the lock cylinder is frozen or the tailpiece connecting the cylinder to the latch has snapped. We see it often on older wrought-iron gates in Alamo Heights and Monte Vista, where decades of humidity have worked through the finish.
- The keypad accepts the code but the gate doesn’t move. The lock’s solenoid or relay is failing to release. On DoorKing and Viking systems, this is a common point of failure after years of exposure to the Texas sun and dust.
- The gate won’t stay closed. The latch isn’t seating into the strike plate, which may be a misaligned gate or a bad spring inside the lock. A gate that won’t stay latched is a real risk: it can swing in the wind and strain the opener arm.
- A key broke off inside the lock. We extract the broken piece and re-key or replace the cylinder. In neighborhoods like Stone Oak where gates see heavy daily use, key wear is a predictable outcome.
- You hear a buzzing or clicking when you try to lock or unlock. The solenoid or actuator is working, but the mechanical latch isn’t cooperating. This is a lock-body repair, not an electrical problem, and it’s usually less expensive than a full replacement.
- You lost keys and want the gate re-keyed. We replace the cylinder or re-key it, and we can match a new key to existing locks if you have a consistent keyway across your outdoor hardware. Re-keying is a practical alternative to replacing the entire lock.
If you’re not sure whether the problem is the lock or the opener, call us. We’ll ask a few questions, and more often than not we can identify whether you need automatic gate repair or lock service before we schedule a visit. That conversation costs nothing, and it helps you decide whether you need a same-day call.
Our Lock Repair Process
Here’s how a lock repair works with Warden Gate Repair San Antonio. The steps are straightforward, but the details are what protect you.
- You call and talk to a person. Our phones are answered live, 24/7. No voicemail tree, no chatbot. You describe what’s happening with your gate lock, and we’ll give you an honest read on whether it sounds like a quick fix or a deeper problem.
- We schedule a visit and send you your technician’s name and photo. Before anyone drives to your home, you’ll know exactly who is coming. Every Warden technician is background-checked, identity-verified, and photo-badged. This is what we call the Threshold Standard, and we enforce it on every visit without exception.
- The technician diagnoses the lock and gives you a written price. No work begins until you see a written quote and approve it. The price covers the full repair, including parts and labor. There are no surprise line items at the end of the job.
- We repair the lock and test it with the opener. We don’t just fix the lock and leave. We cycle the gate, check the strike alignment, verify the keypad or keyed entry works consistently, and confirm the opener engages and releases correctly. If the lock works but the gate sags, we’ll tell you.
- You get the 365-Day Done Right Promise in writing. If the repair doesn’t hold within a year, we return and make it right at no charge. This guarantee is part of every job, not an upsell.
Most lock repairs take between 45 minutes and two hours, depending on the lock type and whether the gate itself needs gate realignment work. We carry common lock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite systems on our trucks, which means we usually finish in one visit.
Lock Repair Pricing in San Antonio
What you’ll pay depends on the type of lock, the brand, and how much of the mechanism needs to be replaced. Here’s an honest breakdown of typical ranges in the San Antonio area:
| Repair Type | Typical Price Range | What It Includes |
|---|---|---|
| Re-key existing lock cylinder | $65 – $120 | New key, cylinder re-pinning, testing |
| Keyed gate lock replacement | $95 – $180 | New lock body, installation, keying |
| Solenoid or relay repair (electronic lock) | $120 – $240 | Diagnosis, part replacement, opener testing |
| Keypad or electronic lock retrofit | $180 – $350 | New keypad or integrated lock, programming, testing |
| Broken key extraction | $50 – $95 | Extraction, cylinder adjustment or replacement if needed |
These ranges reflect what we’ve charged across San Antonio neighborhoods over the past year. The main driver of cost is whether it’s a mechanical lock or an electronic one wired into your gate opener. Mechanical repairs are nearly always less expensive. Electronic repairs cost more because we’re also testing and calibrating the opener’s logic board, not just swapping a part.
One thing worth knowing: if the gate itself is out of alignment, the lock will keep failing no matter how well it’s repaired. When we see that, we’ll tell you before we quote anything. Fixing the lock without fixing the gate would be a waste of your money. If the gate needs weld and rust repair, re-hung, or its hinges rebuilt, we’ll give you a separate written quote for that work. You decide what you want done.
Why San Antonio Homeowners Choose Warden Gate Repair for Locks
A lock is the component that determines who gets in and who stays out. That’s not a small responsibility, and it’s why we don’t send anonymous technicians. You’ll know your technician’s name and see their photo before they arrive. They’ll show a photo ID badge at your door, every time. For many of our customers, especially people who are home alone during the day, parents with young children, or older homeowners, this is the reason they call us instead of a general handyman.
We also understand the brands. Gate locks on Viking, Ghost Controls, DoorKing, and Elite systems each have their own quirks. A Ghost Controls lock wired into a solar-powered opener behaves differently than a DoorKing lock on a sliding gate in a Stone Oak HOA. Our technicians are factory-trained on these systems. That’s not a claim, it’s a requirement for the work we take.
The name matters, too. A warden is someone trusted to watch over a place and keep it secure. That’s the whole idea behind a gate, and it’s the standard we hold ourselves to on every lock repair.
FAQs – Lock Repair
How much does gate lock repair cost in San Antonio?
Gate lock repair in San Antonio usually costs between $95 and $280. A simple re-key starts around $65 to $120, while an electronic lock or solenoid repair on a DoorKing or Viking opener typically runs $120 to $240. Call (940) 531-3336 to describe your symptoms and we’ll give you an honest range before we ever schedule the visit.
Can you repair a gate lock the same day?
In most cases, yes. We keep common lock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite systems on our trucks, and we schedule lock repairs daily across San Antonio. If your gate is unsecured, tell the person who answers the phone. We’ll treat it as a priority.
Is it cheaper to repair or replace a gate lock?
Repairing is almost always cheaper. A re-key costs $65 to $120, while even a full lock replacement with new hardware typically lands between $95 and $180. Replacement becomes the right call when the lock body is cracked, the internals are corroded beyond reliable repair, or you want to move from a keyed lock to an electronic keypad. We’ll quote both options in writing so you can decide with real numbers in front of you.
What brands of gate locks do you service?
We service locks integrated with Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule gate openers. If your gate opener is listed above, we can repair the lock, the opener, or both in the same visit. Call (940) 531-3336 with the brand name from your opener and we’ll confirm coverage.
Do you send a technician’s photo before the visit?
Yes. Before your technician arrives, you’ll receive their name and a photo. At your door, they’ll show a photo ID badge that matches. This is the Threshold Standard, and it applies to every Warden Gate Repair visit in San Antonio. No exceptions.
Call Warden Gate Repair San Antonio
If your gate lock is failing, call (940) 531-3336 for a free estimate over the phone. We’ll give you a straight answer, a real price range, and a technician’s name and photo before they arrive. Written pricing, the 365-Day Done Right Promise, and the Threshold Standard on every visit. That’s how we repair locks in San Antonio.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving San Antonio.