Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Schertz, TX | Warden Gate Repair San Antonio
We provide Gate Repair in Schertz for Ghost Controls openers, and we do it as an independent service provider, not a manufacturer affiliate. That matters here because Schertz’s mix of older ranch homes on shifting clay and newer subdivisions with smart-enabled gates means the same Ghost Controls unit fails differently depending on which side of town you live on. Call (940) 531-3336 for a written quote before any work starts. Our techs arrive with a name, a photo, and the parts to fix most Ghost Controls problems same-day.
If your Ghost Controls opener is dead, stuck, or reversing mid-cycle, we can tell you what it costs to fix before we schedule the visit. Cole Rafferty built Warden Gate Repair San Antonio around a simple rule: tell us what it’s doing wrong, and we’ll tell you what it costs to fix it, in writing, before we start. We’re the Ghost Controls sales & service team Schertz homeowners call when they want a straight answer. We’ve been servicing gates across the region since 2008.
For more about the areas we cover, see our Schertz service area page.
Why Schertz Residents Choose Us for Ghost Controls Service
Ghost Controls openers are common across Schertz, from the original town-center neighborhoods to the newer master-planned communities off FM 3009. We work on these units weekly, and we keep field notes on the specific failure patterns we see in this city. A TDS2 that overheats on a south-facing gate in July behaves differently than a TSS1 with corroded limit contacts after a wet winter. We know both.
Cole grew up in Los Angeles and trained in automated gate systems at Los Angeles Trade-Technical College before spending close to two decades on real jobs, including years of San Antonio-area service work. That experience shows in how we approach Ghost Controls equipment: we default to genuine Ghost Controls parts for control boards, arm actuators, and wireless receivers, because firmware compatibility matters. For generic components like batteries, wire, and photo eyes, we use quality aftermarket equivalents when they match OEM specs. Every tech who arrives at your Schertz door is background-checked, identity-verified, and photo-badged under the Threshold Standard. You’ll get a name and photo sent to your phone before we ring the bell.
Every Ghost Controls repair we do in Schertz carries the 365-Day Done Right Promise. If the fix isn’t right, we come back free. That’s not a slogan; it’s in writing.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Schertz
- Thermal shutdown on TDS2 and TSS1 units: Schertz summers hit 100°F regularly, and an unshaded south-facing gate puts serious heat stress on the operator motor. Ghost Controls units have thermal protection that trips to prevent motor burnout, which means your gate stops working at 3pm on the hottest afternoons. We clean clogged motor fans, check capacitor health, and adjust mounting to reduce heat soak.
- Corrosion on control boards and limit switches: High humidity and occasional freeze-thaw cycles in Schertz cause condensation inside the operator housing, especially in older neighborhoods with poor drainage. Bottom-mounted control boards corrode and limit switch contacts pit, leading to gates that stop mid-travel or lose their open/close limits. We inspect, clean, and replace corroded boards with genuine Ghost Controls parts when needed.
- Premature battery failure in cold snaps: February freezes in Schertz drop ambient temperatures fast, and Ghost Controls backup batteries rely on a trickle-charge circuit that doesn’t compensate well for cold. Batteries that test fine in November can fail in February. We test backup batteries as part of every service call and can install fresh units before storm season.
- Photocell misalignment from clay soil shifts: Schertz sits on expansive clay that swells with winter rain and contracts in summer drought. Gate posts move, and with them, the photo eyes. A gate that reverses halfway closed or refuses to close on a sloped driveway is often a photocell alignment issue, not a board failure. We realign photo eyes and shim post mounts to correct the angle.
- Binding actuator arms on older iron gates: Decades-old wrought-iron gates in established Schertz neighborhoods sag as clay soil shifts under the posts. This twists the Ghost Controls arm mount until the actuator binds and the motor strains. We shim brackets, correct arm geometry, and realign hinges to restore smooth operation without replacing the whole opener.
Ghost Controls Service in Schertz: What Local Conditions Mean for Your Equipment
Schertz’s original town-center neighborhoods were built before modern foundation standards, and their decades-old wrought-iron gates sit on expansive clay that swells and contracts with summer drought and winter rain. That movement causes Ghost Controls arm mounts to twist and bind here more than in adjacent flatter suburbs like Cibolo. We see it on single-panel swing gates all over the older sections of Schertz, where a post shifts a half inch and the arm geometry goes from smooth to strained within one season. The fix isn’t always a new opener. Often it’s shimming the bracket, correcting the actuator angle, and realigning the gate on its hinges. But if you ignore the binding long enough, the motor burns out from fighting the same load every cycle. That’s the expensive version of a problem that started as a $40 shim job.
Last July, our tech pulled up to a 1960s ranch on Borgfeld Road in Schertz where a Ghost Controls TDS2 on a double wrought-iron gate was tripping its thermal overload every afternoon. We found the operator’s motor fan clogged with dust and the arm slightly torqued from clay soil movement under the post. He cleaned the motor, shimmed the mounting bracket, and upgraded the capacitor. The gate ran through the next 100-degree week without a shutdown. That’s the kind of fix you only get from someone who has worked Schertz gates long enough to read the soil, the heat, and the hardware together.
Ghost Controls Models & Products We Service in Schertz
We service every Ghost Controls product line you’re likely to have on a Schertz property. The TDS2 series dual swing gate openers are common on double driveway gates across the city. The TSS1 series handles single swing gates, which we see a lot on older ranch-style Schertz homes. The REX2 series is solar-ready and popular in newer subdivisions where running AC power to the gate wasn’t practical. We also service the Ghost Controls wireless keypad and remote accessory line, including the AXS remote and mount.
When we stock parts for Schertz calls, we prioritize items tied to our local failure patterns: thermal overload capacitors, battery backups, limit switch contacts, and photo eye kits. If we need a Ghost Controls control board or arm actuator, we source it from our supplier network immediately. For most common repairs, we carry what we need in the truck and can complete the job on the first visit. We recommend repair over full replacement unless the operator motor has burned out and the gate itself has structural rust compromising the mount.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Schertz
Ghost Controls gate repair in Schertz typically runs from $135 to $380 depending on the fault. A battery backup installation or replacement usually falls in the $160 to $280 range. Motor replacement for thermal stress failures on TDS2 or TSS1 units tends to cost between $260 and $480, including the part and labor. Gate realignment for clay soil shifting in established Schertz neighborhoods typically runs $120 to $250, depending on how far the posts have moved and whether we need to add shims.
| Ghost Controls Repair in Schertz | Typical Price Range |
|---|---|
| Thermal overload diagnosis & capacitor replacement | $135 – $220 |
| Battery backup installation or replacement | $160 – $280 |
| Photocell realignment & post shimming | $120 – $250 |
| Motor replacement (TDS2/TSS1) | $260 – $480 |
| Control board replacement (genuine Ghost Controls) | $190 – $340 |
You get the written price before any work starts, every time. No line items added at the end. The estimate we give you is the price you pay, and it includes the service call in Schertz. Call (940) 531-3336 for a free quote on your Ghost Controls repair. We’ll tell you what the fix costs in clear numbers before you commit.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Schertz
That’s almost always thermal overload on the operator motor for Electric Gate Repair - Schertz. When Schertz temperatures climb past 100°F and your gate sits in direct afternoon sun, the Ghost Controls TDS2 or TSS1 motor gets hot enough that the thermal protection circuit cuts power. The fix usually involves cleaning the motor fan, checking the capacitor, and making sure the arm geometry isn’t adding load from a shifted post. Call (940) 531-3336 and we’ll tell you over the phone what to check before we even schedule.
Yes, we install battery backup systems on existing Ghost Controls openers in Schertz regularly. Thunderstorm season brings power flickers that scramble opener limits and leave gates stuck mid-cycle. A proper battery backup keeps the gate operating through short outages. We size the battery to your Ghost Controls model and the gate’s weight, then wire it into the existing control board. Expect to pay between $160 and $280 for most Schertz installations.
Not usually. In Schertz, a gate that reverses mid-close is most often a photocell alignment issue caused by clay soil shifting the posts. The photo eyes get knocked out of line and the opener’s safety logic thinks something is in the gate’s path. We realign the photo eyes and shim the mounting brackets to correct the angle. Board replacement should be the last option, not the first. Call us and we’ll diagnose it properly.
On a heavy wrought-iron gate in Schertz, a Ghost Controls actuator arm typically lasts five to eight years before humidity, corrosion, and the extra strain from clay-driven misalignment start taking a toll. Gates that get regular maintenance, including arm lubrication and post alignment, can go longer. Ones that are ignored tend to eat actuators faster. We inspect arm condition on every service call and tell you if yours is approaching failure, with a written price to replace it before it strands your gate.
Yes, we repair Ghost Controls openers regardless of who installed them, anywhere in Schertz. Most of our Ghost Controls service calls are on equipment we didn’t originally install. We’re an independent service provider, not a manufacturer affiliate, which means we can work on your Ghost Controls system without warranty restrictions on our labor. The 365-Day Done Right Promise applies whether we installed the opener or not.
Service Areas Near Schertz
Warden Gate Repair San Antonio serves Schertz and the surrounding communities. If you’re in Ghost Controls service in Kirby, Kirby, or closer to Ghost Controls service in San Antonio, San Antonio, we cover those areas too, along with Fair Oaks Ranch, Terrell Hills, and Floresville. If your gate is acting up and you’re anywhere near Schertz, call and we’ll tell you if we can get a tech to you today.
Book Your Ghost Controls Service in Schertz Today
Tell us what the gate is doing and we’ll give you a written price before we send a tech. Same-day service is available for most Ghost Controls repairs in Schertz. Call (940) 531-3336 now. We answer live, 24/7, not with a voicemail or a bot. Cole and the crew will have the gate moving again and the price settled before the first tool comes out.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving Schertz since 2008.