Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy San Antonio Homeowners Choose Ghost Controls Gate Repair
Ghost Controls gate repair in San Antonio typically runs $165 to $520 depending on whether it’s a control board, actuator, or a full realignment. We’re an independent San Antonio Ghost Controls service provider, not a manufacturer-authorized shop, and that independence means we diagnose the actual failure on your property instead of steering you toward a new opener. Our techs have worked on AXDP dual gate kits, TSS1 single swing systems, and TDS2 dual swing openers across San Antonio for over a decade. So when a Ghost Controls gate stops mid-swing in Stone Oak or a solar panel quits charging a battery on an acreage lot near Helotes, we know what to check before we ever touch a tool. Call (940) 531-3336 and tell us what the gate is doing wrong. We’ll tell you what it costs to fix, in writing, before anything gets taken apart.
What sets our Gate Repair work apart in San Antonio is the terrain and weather layer most generic repair guides skip. Hill Country limestone shifts gate posts over time. San Antonio’s July heat cooks control boards. A TSS1 that worked fine in January fails differently in August, and if your tech doesn’t know that, you pay for parts you didn’t need. We do know it. We’ve been pulling Ghost Controls units apart in this climate long enough to predict the failure before the gate even stops.
Why Trust Warden Gate Repair San Antonio for Your Ghost Controls Gate Repair?
Cole Rafferty grew up in Los Angeles and learned automated gate fundamentals at Los Angeles Trade-Technical College. That was the start. What matters more is the nearly two decades since, spent on real gates with real failures. Cole and his crew have serviced San Antonio properties for years, from residential driveways off Alamo Heights to bigger acreage entries on the north and northwest sides. When it comes to Ghost Controls, we know which model lines tolerate our heat and which ones don’t. We know the AXDP’s power draw under load, the TSS1’s sensitivity to voltage spikes, and the TDS2’s limit switch quirks. That’s not catalog knowledge. That’s field knowledge.
We also run every job through the Threshold Standard. That means the tech arriving at your gate has a background check on file, an identity-verified badge, and a photo sent to you by name before the door ever opens. You know exactly who’s coming. You get the written price before a single panel comes off. And every repair is covered by our 365-Day Done Right Promise: if the fix fails within a year, the return visit is free. We’re an independent Ghost Controls service provider operating under the Threshold Group family, which has been at this since 2008. The name fits the job. A warden is trusted to watch over a place and keep it secure. That’s the whole idea behind an automatic gate, and it’s the standard we work to.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Fix in San Antonio
- AXDP dual gate opener battery drain from underperforming solar panels. San Antonio gets plenty of sun, but our cloudy winter stretches can starve an AXDP’s battery if the panel angle is off or the panel has hazed over from years of UV exposure. The gate works fine for a cycle or two, then drags and stops. We test panel output under load, not just static voltage, because a panel that reads 14 volts open-circuit can still fail under demand. Sometimes the fix is a new panel; sometimes it’s a battery and a charging adjustment.
- TSS1 control board failure after lightning or power surges. San Antonio storms roll through fast and hard, and the TSS1’s board takes the hit more often than any other Ghost Controls component. The gate stalls mid-swing or the opener acts bricked. We see this pattern constantly in the spring storm season. Fixing it means confirming the surge path first, then replacing the board and checking the transformer, because installing a new board onto a damaged transformer just kills another board.
- TDS2 limit switch misalignment causing slamming or unexpected reversal. The TDS2 dual swing opener relies on its limit switches to know where the gate leaf is. When a post shifts, even half an inch, the switch thinks the gate is somewhere it isn’t. The gate slams into the stop, or reverses halfway through the cycle like it hit an obstruction. We realign the limit switches and the gate itself. On Hill Country properties with expansive clay soil, this is one of the most frequent calls we take.
- HDP1 actuator mounting bracket corrosion from sprinkler overspray and humidity. The HDP1 heavy-duty linear actuator is a solid piece of equipment, but its mounting hardware sits low to the ground. Lots of San Antonio homes run sprinkler systems right along the gate line. Constant spray plus our humidity rusts the brackets, and then the actuator works against a binding mount until the motor overheats. We replace the corroded hardware, reposition the bracket if needed, and recommend a deflector or spray adjustment.
- Ghost Controls remotes and keypads losing programming after battery swaps. This one is common across the whole Ghost Controls line. Homeowners swap a remote battery and suddenly the opener won’t respond. Ghost Controls receivers sometimes drop stored codes when power is fully removed for too long. Reprogramming is usually quick, but the trick is identifying whether it’s the remote, the receiver, or the control board’s memory. We test in that order so you don’t replace a $40 remote when the receiver was the problem.
Ghost Controls Parts & Our Repair-vs-Replace Approach
For Ghost Controls gates, we prioritize genuine OEM parts from reputable suppliers. The reason is fit and warranty. Ghost Controls actuators, control boards, and limit switch assemblies are designed with specific tolerances, and an off-brand board creates headaches we’d rather not pass along to you. That said, we will use quality aftermarket components where they make sense. Batteries and remotes are the usual cases. A high-quality aftermarket sealed lead-acid battery made by a reputable manufacturer often performs identically to the OEM part and gets to you faster. Same with remotes. If the aftermarket option is proven reliable and available this week, we’ll offer it with the same 365-Day Done Right Promise.
On the repair-versus-replace question, our rule for Ghost Controls is simple. Control boards and actuators up to about seven years old are usually worth repairing. Past that age, especially in San Antonio’s heat, you’re chasing cascading failures. The board goes, then the actuator, then the other actuator. A full opener kit swap often costs less than three sequential repairs. We’ll always give you the honest math, not the convenient answer. Call (940) 531-3336 and we’ll walk you through what we find.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis on site. We start by listening to the opener and cycling it manually. Ghost Controls units have distinct audible patterns: the beep count, the relay click timing, the motor hum pitch. Those sounds tell us whether we’re chasing a board, a battery, or a mechanical bind. We check the gate leaf movement, the post alignment, and the opener’s power feed before touching any components.
- 2
Written price then repair. After diagnosis, you get a written price for the specific Ghost Controls parts and labor required. That number is agreed before work starts. No line items appear at the end that weren’t there at the beginning. That’s non-negotiable on every Ghost Controls job we do in San Antonio.
- 3
Repair or install using the right parts. If it’s a board, we install it, check the transformer, and test the surge path. If it’s an actuator, we inspect the mounting, the hinge, and the gate leaf weight before seating the new part. Every Ghost Controls repair includes the mechanical side, because an opener only fails again if the gate itself is binding or sagging.
- 4
Full cycle testing under load. We cycle the gate at least five times in both directions, test the auto-close timing, check the obstruction reversal, and verify the remotes and keypad. On solar setups, we test voltage under load and confirm the battery is taking a charge.
- 5
Warranty and follow-up. Every job is covered by our 365-Day Done Right Promise in writing. If the repair fails within the year, the return trip is free. We also send you the tech’s name and photo before arrival on the return visit, same as the first.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in San Antonio
We service and install the main Ghost Controls residential and light-commercial lines in Schertz Ghost Controls service areas and San Antonio: the AXDP dual gate opener kit, the TSS1 single swing gate opener, the TDS2 dual swing gate opener, and the HDP1 heavy-duty linear actuator. We also work on the matching Ghost Controls remotes, keypads, receivers, solar panels, and battery backup systems. We keep common consumables on the truck: remotes, batteries, limit switches, fuses, and some control boards. Larger components we order from our suppliers, usually arriving within two to four business days. If your San Antonio gate uses a Ghost Controls opener we didn’t name here, call us anyway. If it’s a Ghost Controls unit, we’ve likely worked on it.
We Also Service These Brands
Ghost Controls is one of nine gate and opener brands we service. If you have a LiftMaster on one gate and a Ghost Controls on another, one call covers both. We’re authorized service providers for LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule alongside Ghost Controls. That means we never have to force a Ghost Controls fix where a different opener’s part would work better. We just fix what’s broken.
FAQs – Ghost Controls Gate Repair Service in San Antonio
No. We are an independent Ghost Controls service provider. We are not affiliated with or authorized by Ghost Controls as a manufacturer. What we offer is hands-on experience with their equipment, access to genuine OEM parts through reputable suppliers, and the 365-Day Done Right Promise on every repair. For San Antonio homeowners, that often matters more than a manufacturer badge, because we service what’s actually failing on your gate, not what the warranty flowchart says to check first.
Yes, we prioritize genuine Ghost Controls OEM parts for control boards, actuators, and limit switch assemblies. Those components affect safety and warranty compatibility. For batteries and remotes, we’ll offer quality aftermarket options when they’re proven reliable and available faster. You’ll know which option you’re getting and the price before any work starts. Call (940) 531-3336 and we’ll price your specific part.
Most Ghost Controls repairs in San Antonio are completed in one visit, usually within two to three hours. Control board replacements, limit switch adjustments, and battery swaps are typically same-day jobs. If your opener needs a part we don’t have on the truck, we order it and return once it arrives, usually within two to four business days. We’ll tell you the timeline during the initial diagnosis, and we stick to it.
We service the Ghost Controls AXDP dual gate opener kit, the TSS1 single swing gate opener, the TDS2 dual swing gate opener, and the HDP1 heavy-duty linear actuator. We also handle the matching remotes, keypads, receivers, solar panels, and backup batteries. If you have an older Ghost Controls unit that isn’t in the current catalog, call us. We’ve repaired enough of them to know which discontinued parts still work and which ones don’t.
If your Ghost Controls opener is still under manufacturer warranty, using OEM parts and following the manufacturer’s service procedures keeps that warranty intact. We document every repair with the parts used and the work performed. What voids warranties more often in San Antonio is ignoring a failing component until it damages the next part in line. A $60 limit switch replacement today prevents a $400 actuator replacement next year. Call (940) 531-3336 and we’ll tell you what your gate actually needs, in writing, before we touch it.
Ghost Controls gate repair in San Antonio typically runs $165 to $520. A remote or keypad reprogram is on the low end, around $165. Battery replacement with testing runs $180 to $260. Control board replacement for a TSS1 or AXDP runs $280 to $450 including the board. Actuator replacement on an HDP1 or TDS2 runs $350 to $520 depending on the actuator type. A full opener kit replacement runs $800 to $1,400 when the old unit isn’t worth saving. Every price is quoted and agreed before work starts, so you’ll never get a surprise invoice at the end. Call (940) 531-3336 for an exact quote on your Ghost Controls system. Estimates are free.
Three beeps on a Ghost Controls opener usually means the control board detects an obstruction or a limit switch fault. The board thinks the gate is either stuck against something or has lost its position reference. On TSS1 and AXDP units, we check the limit switch wiring first, then the gate leaf for binding. After heavy San Antonio rains, shifted posts can mimic an obstruction signal even when nothing is physically blocking the gate.
Force adjustment on the TSS1 is done through the control board’s potentiometer or the remote-based programming menu, depending on the board revision. We set force to the minimum that cycles the gate reliably, because too much force turns a minor obstruction into a broken hinge or a bent gate. If you’re not sure which board revision you have, call (940) 531-3336 and we’ll walk you through it over the phone or schedule a visit.
Ghost Controls solar gate openers generally use a 12-volt sealed lead-acid battery, often in the 7Ah to 12Ah range depending on the model and whether it’s a single or dual gate system. The AXDP dual kits typically run a larger battery than the TSS1 single openers. We test the existing battery under load before replacing it, because a battery that reads full voltage but collapses under demand is the single most common Ghost Controls failure we see after cloudy San Antonio winters.
That immediate reversal means the obstruction sensor or the force sensing is triggering at the closed position. On Ghost Controls units, the usual culprit is a limit switch set too far past the closed stop, so the gate compresses against the stop and the board reads that compression as an obstruction. We reset the limit, then test the auto-close and obstruction reversal five times in each direction. It’s a quick fix, but it needs to be done right or the gate will slam the next time the post shifts.
Last week our tech diagnosed a Ghost Controls Gate Repair in Kirby, TX and a Ghost Controls AXDP dual gate in San Antonio that would only open halfway. The right motor was overheating. We traced it to a seized hinge post that had shifted after heavy rains. Realigned the gate, replaced the hinge bearings, and the opener ran smooth again without replacing a single electrical component. That’s the kind of fix you only catch by looking at the whole gate, not just the opener.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving San Antonio since 2008.
Book Your Ghost Controls Service in San Antonio, TX
If your Ghost Controls gate is acting up, call (940) 531-3336. A live person answers, day or night. We’ll ask what the opener is doing, give you a straight answer on what it likely costs, and schedule a tech who arrives with a name, a photo, and a written price. Tell me what it’s doing wrong, and I’ll tell you what it costs to fix it, in writing, before we start.