Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Kirby
Gate repair in Kirby typically runs $145 to $420 for most hinge, latch, and realignment jobs, with full operator replacement starting around $850. We dispatch locally to Kirby and can usually have a technician at your door within 24 hours for non-emergency work. Older gates in this area have their own set of problems: sagging posts in clay soil, rusted hinges from hard water, and obsolete control boards that fail after thunderstorms. Call (940) 531-3336 for a written quote before any work starts.
Why Warden Gate Repair San Antonio Is Kirby’s Preferred Gate Repair Company
Kirby homeowners call us because we tell them exactly who is coming and exactly what the repair will cost before the truck ever leaves the shop. Every technician is background-checked, identity-verified, and photo-badged under our Threshold Standard. You get a name and a photo before arrival, and the tech shows you a matching ID badge at the door. That matters in Kirby, where a lot of our customers are home alone during the day or have young kids playing in the yard.
We carry parts for the brands most common in Kirby’s older neighborhoods: Linear, Viking, and Ghost Controls among them. Our repair team knows the difference between a gate that needs hinge shims and one that needs a post re-set in new concrete. That local knowledge means fewer return trips and fewer surprises on the invoice. Every repair comes with the 365-Day Done Right Promise: if the fix fails within a year, we come back free.
Styles & brands we work with
Gate Welding in Kirby
Gate welding in Kirby is the fix when the metal itself fails: a snapped hinge tab, a cracked frame corner on an ornamental iron gate, or a gate panel torn loose from the post by wind or a vehicle bump. We weld on-site with mobile equipment, so the gate stays on your property instead of being hauled to a shop. Most weld repairs in Kirby run $180 to $450 depending on the length of the crack and whether we need to reinforce the surrounding metal.
Frame and Hinge Tab Welds
Older ornamental gates in Kirby neighborhoods often crack at the factory weld points where hinge plates meet the frame. We grind the cracked area clean, weld with proper penetration, and add gusset plates where the original design was too thin. That reinforcement keeps the gate from re-cracking at the same spot a year later.
Rust Repair and Corrosion Welding
Kirby’s hard water and humidity accelerate rust on unprotected steel. When a gate rail rusts through, we cut out the rotted section, fit a new steel insert, and weld it flush. Then we treat the entire area with a rust-inhibiting primer so the repair doesn’t become the next weak point.
Commercial Gate Repair in Kirby
Commercial gate repair in Kirby covers sliding security fences, cantilever gates, and automated entry points at small business properties and apartment communities along Farm to Market Road 78. These gates cycle hundreds of times a week, so a worn roller, a stripped rack gear, or a failing limit switch becomes a real liability fast. Commercial repair in Kirby typically starts at $280 for mechanical fixes and $600 and up for operator replacement, depending on the gate’s size and duty cycle.
Slide Gate Track and Roller Service
Slide gates in Kirby’s newer commercial properties collect hard water scale on rack and pinion components. The scale strips soft gear teeth and jams the operator. We replace worn racks, re-align rollers, and apply a dry lubricant that won’t trap grit like grease does.
Operator Diagnostics and Board Repair
Commercial operators fail in predictable ways after Kirby thunderstorms: control boards cook, capacitors blow, and limit switches weld shut. We bench-test the board before quoting a replacement. If the operator is repairable, we fix it. If it’s a 15-year-old unit with obsolete parts, we’ll tell you honestly and quote a new one.
Trusted Brands We Service in Kirby
Our Kirby customers run Linear operators on chain-link gates, Viking residential openers on ornamental drive gates, and Ghost Controls units on newer DIY-installed gates. We’re factory-trained on all of them and stock common boards, arms, and remotes locally, which means most Kirby repairs don’t wait on a parts shipment. DoorKing equipment shows up often on commercial properties near Kirby’s industrial pockets, and we carry replacement loops and photo-eyes for those units too. The right parts and the right knowledge arrive together, every time.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Kirby Homes
- Sagging gates from shifted posts: Kirby sits on clay that expands and contracts with rainfall. Posts set without proper footings rotate or tilt, and the gate starts dragging on the latch side. This is rarely a hinge problem; it’s a footing problem.
- Dead operators after thunderstorms: Kirby’s summer storm season brings lightning and power surges. Original operators from the 1970s and 80s lack surge protection, so their boards burn out. We retrofit surge protectors on every older unit we touch.
- Rust from sprinklers and hard water: Gates near Kirby lawns get hit with irrigation spray daily. The hard water leaves mineral deposits that eat through paint and pit the steel. We repair the corrosion and recommend rust-resistant coatings for the repair areas.
- Gates hung before modern safety standards: Many original Kirby gates have no photo-eyes or reverse sensors. They’ll close on a car or a person. We can retrofit safety edges and photo-eyes onto most existing operators, bringing the gate closer to current standards without replacing everything.
Pricing for Gate Repair in Kirby, TX
A hinge replacement on a typical Kirby chain-link gate runs $145 to $260. Post re-setting with a new concrete footing costs $320 to $550 because it involves augering, rebar, and concrete curing time. Welding repairs fall between $180 and $450. Operator control board replacement runs $220 to $400 for common Linear and Viking models; a full operator replacement starts around $850 for residential swing units and goes up for slide gates with rack work. You get the written price before we start, and that number doesn’t move unless you approve a change first. Call (940) 531-3336 for a free estimate in Kirby’s ZIP codes and surrounding streets.
We Also Serve Cities Near Kirby
If you’re just outside Kirby, we cover the surrounding area too. Our Gate Repair team works in San Antonio, Schertz, Fair Oaks Ranch, and Terrell Hills. Some Kirby customers also have family in those nearby cities who need gate work, and we handle those calls the same way: name, photo, and written price before the work begins. See our Gate Repair in Kirby page for local specifics.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kirby
Most sagging gates on Kirby’s original 1950s and 60s homes need the post re-set, not shimmed. The steel pipe posts of that era were often set without concrete footings, and Kirby’s shifting clay has rotated them out of plumb. Shims buy you a few months at best. Re-setting the post with a 24-inch concrete footing and rebar is the permanent fix. If the hinge itself is worn beyond adjustment, we replace it with a corrosion-resistant stainless hinge while the post is out. Call (940) 531-3336 and we’ll assess it in person and give you a written price either way.
It depends on the operator. Some 1970s-era control boards are still available as refurbished units, but the repair often costs within $100 to $150 of a complete new operator. On a 50-year-old unit, that’s usually not money well spent; the motor and gears are worn too, and the next failure will come soon. In Kirby, where thunderstorms regularly fry old boards, we typically recommend replacing the operator and adding a surge protector so the new one survives the next storm season. We’ll quote both options honestly and let you decide.
If the rust is surface-level and the steel is still solid behind it, welding repair usually saves the panel. We grind out the pitted areas, clean them, weld in fresh steel where the section has thinned, and coat the repair with rust-inhibiting primer before repainting. A full panel replacement is only necessary when the frame channels have rusted through in multiple places or the pickets are visibly perforated. Most sprinkler-damaged gates we see in Kirby’s newer neighborhoods are repairable, not replaceable.
A swing gate operator pushes or pulls a gate that swings on hinges, which suits most Kirby driveways with enough clearance for the arc. A slide gate operator moves a gate that rolls sideways along a track, which works better on sloped lots or where the driveway is short and there’s no room for the gate to swing inward. Slide gates handle wind load better, but their racks and rollers need more maintenance in Kirby’s hard water conditions. Most residential Kirby properties are better served by a swing operator unless the driveway slope or layout dictates otherwise.
Automatic gates are required to have safety devices that prevent entrapment, and photo-eyes are the standard for residential installations. A gate that closes on a vehicle without stopping is a serious safety hazard and should be corrected. We can retrofit photo-eyes and a reversing edge onto most existing operators without replacing the motor. The retrofit typically costs $300 to $600 depending on the operator model and the length of the gate. We’ll quote it in writing before starting.
If your gate is sagging, rusted through, or the operator quit after the last storm, call Warden Gate Repair at (940) 531-3336. We’ll send a technician you know by name and photo, with a written price before any work begins. Serving all of Kirby, TX, with the 365-Day Done Right Promise on every repair.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Kirby and the surrounding San Antonio metro.