Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Alamo Heights
Gate repair in Alamo Heights usually costs $185 – $420 for a service call and repair, with full operator replacement running $850 – $1,900 depending on the hardware. We answer live 24/7 and can typically have a tech at your door the same day you call. If your 1940s iron gate is sagging, binding, or stuck halfway, call (940) 531-3336 for a written quote before any work starts.
Alamo Heights is a different kind of service area. The streets off Broadway and along Patterson Avenue are lined with Spanish Colonials, Tudors, and Ranch homes that have stood since before the interstate came through. Their gates were built to last, and most of them have. But the clay underneath Alamo Heights has other plans, and we’ve spent years learning exactly how those two forces collide.
We’re Warden Gate Repair, part of the Threshold Group family since 2008. Cole Rafferty leads our team. When we roll into Alamo Heights, we come knowing the difference between a bad capacitor and a limestone pier that’s heaved two inches out of plumb. That knowledge is why homeowners here keep our number.
Why Warden Gate Repair San Antonio Is Alamo Heights’s Preferred Gate Repair Company
Homeowners in Alamo Heights don’t open the door for just anybody. We understand that. Before we arrive, you get the tech’s name and photo, and they’ll show a photo ID badge at the door. That’s the Threshold Standard, and it’s non-negotiable on every single visit. Cole Rafferty built our reputation on it.
Our Gate Repair work in Alamo Heights skews toward older equipment. We service Linear, Viking, and Ghost Controls operators that were installed in the 1990s and early 2000s, many of which are now obsolete but still repairable. We stock the retrofit parts locally so a trip across town doesn’t eat your afternoon.
When you call, a person answers. Not a voicemail, not a chatbot. At 2pm or 2am, someone picks up and starts figuring out your gate. For homes in Alamo Heights, where a stuck-open gate on Broadway means the whole street can see into your courtyard, that matters.
Every job comes with a written price before work begins, and every repair carries the 365-Day Done Right Promise: if it fails within a year, we come back free and make it right.
Styles & brands we work with
Metal Gate Repair in Alamo Heights
Metal Gate Repair in Alamo Heights often starts with a post or hinge problem, not the gate leaf itself. The wrought-iron and steel gates hung in the 1920s through 1960s were built heavy, and the limestone or brick piers they swing from have been heaving with the expansive clay for decades. We see hinge posts that have rotated a couple degrees, enough to drag the bottom corner of the gate against the driveway every afternoon when the sun hits the metal and expands it.
A typical metal gate repair in Alamo Heights runs $185 – $420. That covers hinge replacement, post re-setting, sag correction, weld repair, and rust remediation on most custom iron gates. If the gate has rusted through at the bottom hinge, the fix may require cutting out the failed section and welding in new steel, which runs $225 – $550 depending on the extent.
Hinge Post Reset and Alignment
The most common call we get in Alamo Heights is a swing gate that binds at the latch. Homeowners assume the operator is failing. Nine times out of ten, it’s the hinge post. We reset the post footing and shim the hinge to bring the gate back into plane, often without touching the original stucco finish.
Weld and Rust Repair
Texas sun and humidity eat unprotected steel. On a 1930s Tudor gate with ornamental scrollwork, we can fabricate replacement sections that match the original profile. The goal is always to keep the gate looking like it did when it was first hung, not like it went through a body shop.
Wood Gate Repair in Alamo Heights
Wood Gate Repair in Alamo Heights usually involves more than swapping a hinge. The original cedar and oak driveway gates on many of these homes are heavy, and they’ve been hanging on the same posts for sixty to ninety years. Rot at the post base, stripped lag bolts, and soil heave combine to pull the gate out of square. You can’t just tighten a screw; the post has to be addressed first.
Expect to pay $225 – $475 for a wood gate repair in Alamo Heights. That includes post reinforcement or replacement, hinge re-mortising, sag correction with a turnbuckle or steel frame, and treating or replacing rotted bottom rails. Full custom wood gate rebuilding, when the original is too far gone, runs $700 – $1,500.
Post Replacement and Rot Repair
A rotted post is the root cause of most sagging wood gates in Alamo Heights. We dig out the old footing, set a pressure-treated post in concrete, and re-hang the original gate on new hinges. When the post is set in clay that heaves, we over-dig the footing and add gravel so the post can breathe without shifting the gate plane.
Sag Correction on Heavy Original Gates
Alamo Heights wood gates are often oversized and ornate. Realigning one requires adjusting the hinge geometry, not just cranking the frame. Our team has done enough of these to know when a pull-cable fixes it and when the frame needs steel reinforcement, and we’ll show you the difference before we start.
Trusted Brands We Service in Alamo Heights
We are authorized service for nine gate and opener brands, and in Alamo Heights we most commonly work on Linear, Viking, and Ghost Controls equipment. Many of these operators date from the 1990s and early 2000s, and the control boards are no longer manufactured. We keep tested retrofit boards, safety photocells, and receiver kits in our San Antonio stock so an Alamo Heights repair doesn’t stall waiting on a part from a warehouse two states away.
Our techs are factory-trained across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the right knowledge arrives with the right part, not the other way around.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Alamo Heights Homes
- Limestone and brick piers heaving with the seasons. Alamo Heights sits on expansive clay that swells after rain and shrinks in the dry Texas heat. A pier that moves a quarter inch throws a swing gate out of plane, and the gate binds at the latch every spring. We reset footings and shim hinges to restore clearance without disturbing the original pier face.
- Obsolete control boards failing after lightning. Storms roll through the Hill Country fast and hard. A 1990s Linear or Viking board with no surge protection can fry on a single strike, leaving the gate stuck half-open. We retrofit modern boards with UL 325 entrapment protection while keeping the original operator shell where possible.
- Rust at the bottom hinge. The humidity off the Gulf settles into the low spots on a gate. Alamo Heights iron gates often rust through at the lowest hinge point, where water sits after every rain. We cut out the failed steel and weld in a replacement that matches the original profile.
- Slide gates binding on limestone track. A few Alamo Heights homes have original slide gates running on tracks set into limestone driveways. After a heavy rain, the clay under the track swells and the track shifts, binding the rollers. We re-level the track and add drainage so the same repair doesn’t come back every storm season.
Pricing for Gate Repair in Alamo Heights, TX
You should know the numbers before you call. A service call to diagnose a gate problem in Alamo Heights is $85, and that’s credited toward the repair if you proceed. Hinge replacement runs $185 – $320. Operator replacement, including the motor and control board, runs $850 – $1,900 depending on the model and whether we can reuse your existing arm or track. Full gate replacement, when the original is beyond saving, starts at $1,200 for a basic steel gate and goes up from there for custom iron or wood to match a 1930s or 1940s original.
What changes the price in Alamo Heights: whether the post footing needs resetting, whether the operator is obsolete and needs a retrofit board, and whether the gate has ornamental iron work that needs custom fabrication. You’ll get a written quote before any work starts, every time, no exceptions. Call (940) 531-3336 for a free estimate.
We Also Serve Cities Near Alamo Heights
While this page focuses on Alamo Heights, our crew regularly runs to San Antonio proper, Schertz, Kirby, and Fair Oaks Ranch. If your gate is acting up and you’re anywhere in the northeast San Antonio corridor, we can reach you fast. For a closer look at our Alamo Heights service area or to schedule a visit, call the number above.
Serving Alamo Heights, TX - Our Local Coverage Area
We’re based in the Alamo Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Alamo Heights
It’s almost always the post. Alamo Heights clay swells with spring moisture, and a limestone or brick pier heaves just enough to throw the hinge out of plane. The gate then drags or binds, which can burn out the operator motor if ignored. We check the hinge post first, reset the footing if needed, and only replace the operator if it’s actually failed. Call (940) 531-3336 and we’ll tell you which one it is before quoting anything.
Yes, in most cases. A 1970s operator predates UL 325 entrapment standards, but we can retrofit modern safety photocells and edge sensors while keeping the original operator housing. This matters on Alamo Heights homes where the gate is original to the house and the owner wants the look preserved. Retrofitting runs $250 – $500 depending on the wiring run and the operator’s power supply.
The clay under the track swells when it absorbs water, pushing the track up or sideways. A limestone track set directly on clay will bind until the ground dries out, and over time the track develops a permanent hump. We re-level the track and add drainage so water moves away instead of pooling underneath. That fix runs $300 – $600 depending on track length.
We can in many cases. If the brick face is cracked but the pier is still structurally sound, we reset the footing, add a steel bracket behind the brick, and re-point the mortar to match the original. The gate face stays untouched. If the pier has rotated or crumbled, we rebuild it with salvaged brick where possible so the repair matches the home’s age. A full pier rebuild runs $600 – $1,200.
Usually not. Cutting out the rusted section and welding in a replacement plate runs $180 – $350, and it keeps the original gate face, scrollwork, and character intact. A full replacement gate in the same custom style starts around $1,200 and goes up quickly for hand-forged ornamental work. Unless the rust has compromised more than a third of the gate, repair is the better value. Call (940) 531-3336 for an exact quote, free.
On a 1940s Spanish Colonial off Broadway, we found a wrought-iron swing gate with an obsolete Linear operator and a hinge post that had rotated nearly two degrees from clay heave. We reset the post footing, fabricated a hidden steel bracket to preserve the original stucco pier, and retrofitted a LiftMaster LA400 with new safety photocells, keeping the original gate face untouched. That’s the Alamo Heights job we do best: making an old gate work like new without making it look new.
If your gate is sagging, sticking, or dead, call (940) 531-3336 now. A live person answers 24/7, the price is written before we start, and every repair carries the 365-Day Done Right Promise.
Written by Cole Rafferty, Owner at Warden Gate Repair San Antonio, serving Alamo Heights and the surrounding area since 2008.